Model assessment · BRIM

BRIM50013 Electric Handheld Burr Grinder review

A handheld electric burr grinder that requires its adapter and wall outlet throughout operation, with user-controlled stopping and a dispensing tray.

Sources checked 2026-10-20 · Our editorial approach

We may earn from qualifying purchases. Compare the exact model, size and package.

50013Illustrated overview
A useful fit for

Someone wanting a compact hand-held form while grinding beside a 120 V outlet.

The main tradeoff

It is explicitly non-rechargeable; handheld does not mean cordless, and you must switch it off yourself.

Your needs, this model

Does it fit your priorities?

Can I grind with this away from a power outlet?

No. The manual explicitly says the adapter must remain connected to the grinder and the wall. It is non-rechargeable.

Explore this need in the finder →
Can I decide when to stop a batch in the collection tray?

Yes. Press On/Off to start, then press again to stop. Ordinary operation continues until you switch it off.

Explore this need in the finder →
Does it include guidance for filter coffee and French press?

Yes. The manual chart names both, with separate medium and coarse ranges. These are maker starting settings, not independent performance measurements.

Explore this need in the finder →

The 50013 is easy to misunderstand from its name or shape. It is handheld and electrically driven, but it is not cordless. BRIM explicitly says its adapter must remain connected to both the grinder and a wall outlet for it to operate. Choose it for a compact hand-held routine beside an outlet, rather than for battery grinding at a campsite or wherever you happen to brew.

The power requirement changes the buying decision

A small cylindrical grinder can resemble a rechargeable model, but the original instructions remove the ambiguity: this unit is non-rechargeable and uses 120 VAC through its documented adapter arrangement. The adapter is a functional part of the setup, not merely something used occasionally to refill a battery.

Before buying a used example, confirm the correct adapter is included and undamaged. A body without its supply is not a complete portable system. Do not substitute an adapter by guessing from a connector that appears to fit.

You control the stopping point

Press On/Off to start, then press it again when enough coffee has been ground. The grinder continues running until switched off. This is genuine manual stopping, unlike a cup-timed cycle that merely allows emergency interruption.

It also means you must stay involved. If the goal is a finished dose at a selected weight or duration, this operating arrangement does not provide that automation. Measure the beans or collected grounds as your recipe requires and use the switch yourself. Overload protection is a response to abnormal loading, not a substitute for normal dose control.

The tray has a door—close it before grinding

Ground coffee collects in a tray at the lower end. Its rotating ring opens or closes a dispensing door. The instructions warn that grounds can be expelled if the door is left open during grinding, so make checking the closed position part of every setup.

After the run, open the door to dispense into the brewer. This is a collection-and-transfer routine, not a verified direct-portafilter holder. Consider whether that extra handling suits the way you prepare coffee, especially if you are trying to keep a busy espresso counter tidy.

Loading and brew choices

The manual describes loading up to four of its included measuring scoops. That is not a verified gram capacity: bean density and the scoop's actual fill affect mass. If your recipe is in grams, use a scale rather than converting the scoop count with an assumed coffee density.

Its chart names espresso and AeroPress toward the fine end, drip and pour-over in the middle, and French press and cold brew toward the coarse end. These are intended starting choices. They do not prove specialist nonpressurized espresso performance or a measured distribution of particles.

Cleaning access is more limited than the form suggests

The tray can be removed for cleaning, and the instructions specify wiping the outside and keeping the grinding area clear. They do not establish a routine user-removable upper burr. Do not take apart the mechanism simply because the body separates for loading; assembly access and authorized burr servicing are different things.

Disconnect the adapter before cleaning. Keep the motor body out of water and follow the part-specific cleaning instructions. A statement about the removable tray does not make the whole grinder dishwasher-safe. The guide also excludes wet ingredients, spices and other non-coffee uses.

The 50013 is a household tool for someone who likes its compact form and accepts manual control and a connected cable. It is the wrong match for a cordless requirement, an automatic dose or an assumption of unrestricted disassembly. The basis is the original BRIM50013 guide, not a test of its taste, noise or longevity.

Key details at a glance

Maker-supported espresso useYes
Maker-supported filter brewingYes
Maker-supported French press useYes
Grounds bin or dosing cupYes
Manual grinding stopYes
Programmable time stopNo
Integrated weight-controlled stopNo
Single-load empty stopNo
Normal battery-powered grindingNo
Manufacturer household useYes
Manufacturer commercial useNo

Use the exact model’s instructions for operating limits, supplied equipment and version differences.

Sources for this assessment

Find a grinder for your daily coffee.

Compare the brewing methods, loading routine and dose controls you actually need.